Power Pal - 1500 Watt Power Conversion System

• Input - 12 V/DC supplied via jumper cables

• Output - 12/24 V/DC or 115 V/AC @60 Hz

• Output plugs are: 
  (a) DC - Cigarette Light Adapter (CLA) with a reset type fuse 
  (b) AC - 3 USA-style electrical plugs converter with: 
  26 Amp surge capacity:
  (a)  Battery Saver Sensor to shut off power and to sound an alarm when the source battery reaches a 70% discharge level 
  (b)  Discretionary reset switch to reactivate the power source and to disarm the alarm if user desires to continue past the 70% level.  (Switch is covered to prevent accidental tripping.)

• Four-digit - seven segment digital display to show power consumption

• Lighted ON/OFF (Green) switch to indicate when power is on

 Power Plant

• Input - 12/24 V/DC supplied via jumper cables

• Output - 12/24 V/DC or 115 V/AC, 220 VAC, 230 VAC or 240 VAC @50 or 60 Hz (voltages are changeable internally only by authorized personnel)

• Output plugs are:     
  (a)  DC - Cigarette Lighter Adapter (CLA) with a reset type fuse                                                      
  (b)  AC - 1 IEC style plug

• 1500 W voltage inverter with:
  (a)  Battery Saver Sensor to shut off power and to sound an alarm when the power source battery reaches an 80% discharage level                                                                                  
  (b)  Discretionary reset switch to reactivate the power source and to disarm the alarm if user desires to continue past the 70 - 80 % level.  (Switch is covered to prevent accidental tripping.)                           
  (c)  Internal 15 Amp smart battery charger/trickle charger                                                                     
  (d)  Automatic Transfer Switch (ATS) to assure continuous output power in case of line source power outage.  5 MI transfer speed

• Four digit - seven segment digital display to show power consumption

• Lighted ON/OFF switch (Green) to indicate when power is on

• Charging light indicator (Red) to indicate as follows:  Bad/Replace, Charging, Charged

• Storage compartment for cables/adapters

• Lock with key to prevent access to inverter

• Storage compartment for batteries to have padded top and tie downs to prevent batteries from shifting or shorting

• Ergonomical design for easy moving

• The Power Plant will have an internally mounted Anderson jack connector and a special set of jumper cables which snap onto the Anderson Jack and the alligator clips which would be attached to the negative and positive posts of any 12-volt vehicle for additional backup charging in the event of  long-term outages.

• The Anderson jack (which is directly connected to the 12-volt battery storage) can also accept solar panels and/or wind turbines to supplement or be the primary source of charging the system

• Housing measures approximately 35" x 20" x 15" 

• Weight is approximately 70 lbs